Kenmore 9082 Replacement Refrigerator Filter

ABOUT PRODUCTS

Kenmore 9082 Replacement Refrigerator Filter

Water filter 9082 is for select Kenmore bottom-freezer refrigerators.

Replace every 6 months, or more often if water flow slows.

Reduces, lead, asbestos, chlorine taste and odor, sediment and pharmaceuticals

Long-life filter (6 months) for fewer changes

Compatible with select Kenmore® refrigerators

Water filter 9082 is for select Kenmore bottom-freezer refrigerators. Enjoy 6 months of clean, fresh water with this Kenmore Replacement Refrigerator Filter. This filter is NSF-certified to reduce lead, asbestos, chlorine taste and odor, sediment and trace pharmaceuticals.*Long-life filter (6 months) for fewer changes

Replaces Part Numbers: W10413645A, EDR2RXD1, W10790814, AP5983562, PS11722126, AH11722126, EAP11722126, 2400649, AH3502128, AP5322615, EAP3502128, PS3502128, Kenmore 9082. EDR2RXD1 FILTER2 Whirlpool Product Data Sheet

• Reduces, lead, asbestos, chlorine taste and odor, sediment and pharmaceuticals
• Long-life filter (6 months) for fewer changes
• Compatible with select Kenmore® refrigerators
• NSF Certified

Kenmore 9082 Replacement Instructions

1. Locate filter compartment at the ceiling inside the flip down cover.
2. You might have to remove the upper shelf for more room.
3. Push on the filter cover to open filter compartment.
4. The filter will drop down and to remove you will push in and turn counterclockwise and pull straight out. (the water will shut off automatically)
5. Discard the old filter.
6. Line the knotch on end of the new filter upward.
7. Push the new filter into the fridge with knotch facing up and gently push filter while twisting clockwise till it locks into place.
8. Push filter upward till it locks in the compartment and close the cover.
9. Re-install Shelf (if taken out)
10. Reset your change filter light (if your fridge has one)

Resetting Your Filter Change Indicator

1. Press and hold the dispenser LOCK and AUTO-LIGHT buttons on the dispenser at the same time for 4 seconds.
2. OR: until the filter status indicator begins to flash, then release the buttons.